banner



How To Clean Sea Sponge From Beach

Download Article

Download Article

Seashells can be a nice memento of a fondly remembered trip to the beach. They can be used as decorative items around the home or as part of a craft project. If you are collecting seashells from along the beach, it's important to clean the shells on the outside and inside and polish them to preserve them. Get started at step number one below for how.

  1. 1

    Obtain your shells from your favourite collecting spot. This may be a local beach, or one you visit when on vacation. Shells can also be purchased from craft stores and from online sources.

  2. 2

    Do not take any shells with sea creatures alive in them. Be considerate of nature and leave seashells with live creatures in them alone. You can tell a shell is still alive if you turn it over and there is a creature inside it.

    • Check with your country's laws to ensure you don't collect illegal seashells. For example, in U.S. waters, Queen Conches are illegal to take. They are a protected species due it being vulnerable to overfishing.

    Advertisement

  3. 3

    Determine whether a seashell is a live or dead shell. In shelling, a live seashell is a shell with animal tissue still attached to it. This is different from a seashell that is alive since the animal tissue in a live shell is dead. A dead shell is a shell with no animal tissue inside it.

    • Understanding whether a shell is live or dead will affect the way you will choose to clean your shell. For example, live shells will require you to remove the animal tissue inside.

    Advertisement

  1. 1

    Boil the shells to remove animal tissue. Boiling or cooking a live seashell will loosen up any animal tissues inside the shell and make it easier to remove. You will need a pot and tweezers or some tool like a dental instrument to remove the animal tissue. To clean live shells by boiling:

    • Place the seashells in a large pot of room temperature water. Cover the shells with about 2 inches (5 cm) of extra water. It's important to use room temperature water and to put the shells in the pot before heating them up because any sudden heat could crack the shells.
    • Bring the water to a boil. Let the water roll for about 5 minutes. If you are boiling more than one shell, add extra boiling time. As well, larger shells might require more boiling time.
    • Take out the shells with tongs and place them gently on a soft surface like a hot towel.
    • Carefully, with your tweezers or any other tool, pull out any animal tissue from inside the shells and dispose of it.[1]
  2. 2

    Bury your live shells. This method of cleaning out a live shell can take the longest, but many choose to use this method to prevent the shell from being damaged. Boiling and freezing, as well as pulling out animal tissue by hand, can cause a shell to crack. Burying a live shell, provided you bury it in a safe place, protects it from damage and is a natural way to clean out animal tissues. Ants, bugs, and other insects will feed on the shell and clean it out. To clean live shells by burying them:

    • Dig a hole in the ground. Make sure the hole is large enough to fit all your shells and also provide plenty of space between each shell. The hole should also be around 18 to 24 inches (45 to 60 cm) deep to prevent unwanted animals from digging up your seashells or people from stepping on top and crushing your shells.
    • Place your shells evenly with space between them in the hole.
    • Cover the shells with dirt.
    • Wait a few months for insects, larvae, worms, and bacteria to remove the tissue inside the shell. The longer you wait, the better the results.[2]
    • Dig up the shells again and check to see if all signs of animal tissue are gone.
  3. 3

    Freeze your live seashells. Freezing kills any remaining animal tissue inside the shell and makes it easier to remove. To clean a live seashell by freezing:

    • Place your shells in a Ziplock bag. You may need to use several bags if you have many shells.
    • Add water to the bag until all the shells are covered.
    • Place the bag in the freezer.
    • Let it freeze solid for a few days.
    • Remove it from the freezer and let it thaw completely.
    • Take out the shells and pull out the animal tissue from inside the shells.

    Advertisement

  1. 1

    Soak your seashells in water for a week. The water will dissolve any dirt on your seashells and give you shells that are shiny and clean by the end of the week.[3]

    • Change the water every day or so. Adding fresh water to your seashell soak can result in even cleaner seashells.
    • You can also choose to boil your dead seashells after the week is over to ensure all particles or animal tissue is completely gone from the shells.
  2. 2

    Use bleach to clean your seashells. Bleach will definitely remove any dirt, impurities, and animal tissue from your seashells. However, some seashell collectors warn that using bleach can destroy the colour of your shells and make them smell like bleach forever. To clean a shell using bleach:

    • Fill a pot with equal parts water and bleach. It should be full enough to cover all shells.
    • Soak the shells in the solution. You might notice a flaky, leathery covering coming off the shells. This is the periostracum or the organic coating or "skin" of the shell.
    • Once this coating is gone, you can remove the shells from the solution. Additionally, you can use a toothbrush to remove particles from the shells.
    • Rinse your shells thoroughly and allow to dry completely.
    • Rub baby oil or mineral oil on the shells to restore shine.
  3. 3

    Use toothpaste to clean your shell. Toothpaste is a less strong alternative to bleaching your seashells. To clean a dead shell by using toothpaste:

    • Smear a light coat of toothpaste over one side of the shell at a time.
    • Let the toothpaste-covered shell sit for at least 5 hours, so the toothpaste has time to soak right in. It is fine to leave it overnight to make sure that the toothpaste does its job.
    • Once it has gone tacky and/or hard, depending on the thickness of the layer of toothpaste you applied, get an old toothbrush and a glass of warm water and scrub the shells thoroughly. Make sure you get into all the little cracks and hard-to-see gaps.
    • Make sure that all of the toothpaste has been removed, even if this means rinsing the shells under running water once scrubbed. This will remove the grit and other parts in the toothpaste, remove anything rough or sharp, leaving the surface very smooth with very few flaws.
  4. 4

    Remove barnacles from your shells. If you see that barnacles are attached to your shells, use a dental tool, soft toothbrush, or wire brush to remove the barnacles.

    • This is most effective if the shells have been cleaned previously, either from being soaked in water or bleached.

    Advertisement

  1. 1

    Rub mineral oil over each shell to give it a deep gleam. Allow the shells to dry for at least one full day and then rub oil on the shell.

    • Mineral oil not only restores the shine of the shell, but helps to preserve the shell.
    • Similarly, you can use WD-40. However, when using this material, be sure to use gloves to handle the shells.
  2. 2

    Spray the shells. You can use satin-finish polyurethane or coat with clear nail polish. This type of finish preserves the shell's organic look while giving it an extra glossy shine.

    • Do one side of the shell each day. Allow the shell to dry completely before starting on the other side. Each side can take about a day to dry.

    Advertisement

Add New Question

  • Question

    Can I use vinegar to clean seashells?

    Community Answer

    No. The vinegar will dissolve your shells because it is an acid and shells are calcium carbonate.

  • Question

    Can I put mineral oil in a bowl, then submerge/dip the shells?

    Community Answer

    This would put a very thick layer on the shells and leave a sticky residue. You just want enough to soak into the microscopic pores and give a thin coat.

  • Question

    Can I use Bio-Oil to polish seashells?

    Community Answer

    Mineral oil is much cheaper and more effective! Howard's cutting board oil is about $7 at Home Depot. It is mineral oil and vitamin E.

  • Question

    Can I clean shells in Dawn detergent?

    Community Answer

    Yes, but it won't remove much. You need to do a process to remove stains and animal tissue.

  • Question

    Can I use olive oil to polish my shell?

    Community Answer

    Do not use olive oil on shells or stones! I tried and it stained them the color of the oil. If you would rather not use mineral oil or any petroleum based oil, try rubbing very small amounts of coconut oil on the shells and stones - it may be a little greasy at first but it does soak in after a while and leaves the shells looking natural.

  • Question

    Can seashells fade in the sun?

    Community Answer

    Sunlight can act like a natural bleach, so it is possible for the colours to fade under strong sunlight. Best to keep shells in a shaded area. If you're putting them in the sun to dry up, be sure to monitor the weather and take them in when they're dry enough.

  • Question

    My sea shells smell bad. What can I do about that?

    Community Answer

    They smell bad because live creatures are in them or recently died in them. Soak them in hot water for around three hours, then refrigerate them until they don't smell.

  • Question

    Will metriatic acid shine the shells also?

    Community Answer

    No. It might help to clean them, but it will not shine them. You could use mineral oil to shine them, or very small amounts of coconut oil.

  • Question

    Can mold grow on seashells?

    Community Answer

    It depends on the environment of the shell and what's on the shell. Clean them regularly, and keep your shells out of bad atmospheres to keep them from developing any unwanted bacteria. Typically, shells don't have the right environment for bacteria such as mold to develop.

  • Question

    Can I use clear nail polish to make my seashells glossy?

    Community Answer

    Yes, but it looks fake. Satin clear spray is the best paint, but I prefer to oil mine once a year or as needed for the best natural look.

Show more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

  • Leave live shells at the beach. They are homes to animals, and there are plenty of shells that don't need animals to be removed from them. Toss animal-filled ones gently back into the sea and look for ones free of animals instead.

  • Though they might not be as beautiful, it is best to collect dead shells from the beach rather than collecting live specimens from the ocean, because it's much better for the environment, and you won't have to bother with removing the flesh.

  • Alternatively, you can put the live shells near a trash can or dumpster. Find a bin where you can see fly larva or maggots around it, but make sure that the shells are exposed enough for them to be able to get in. The flies may lay eggs in the shell, and then their offspring will eat the dead flesh within the seashell. This process can take at least a week or more.

Thanks for submitting a tip for review!

Advertisement

  • Certain shells (notably Cowries) can be damaged rather than preserved by bleaching and other treatments. If you have a shell that is very special to you, identify the species of shell and research the correct treatment for it. You can also experiment with other shells of the same type that you don't like as much.

  • Some seashells will not take to boiling well. This includes especially fragile or soft shells. If you are worried about breaking your seashells, bring the pot to an almost boil instead of a complete boil.

  • Be careful not to burn yourself when removing hot shells from boiling water. Always wear protective gloves.

  • Always wear protective eye gear, as well as gloves, when handling bleach.

  • Bleaching will sometimes strip the colour from shells. If you do not desire a "white" shell, check frequently and/or dilute the bleach solution (you can always add more if necessary).

Advertisement

About This Article

Article SummaryX

To clean and polish dead seashells, put them in a pot of room temperature water and boil them for 10 minutes. Then, remove the animal tissue with tweezers. Next, cover the shells with a layer of toothpaste and let them sit for 5 hours. When the time has passed, scrub the shells with an old toothbrush and warm water to remove the dirt. Alternatively, if you're not in a hurry, soak them in water for a week. Finally, leave the shells to dry for a day before polishing them with mineral oil to make them gleam. For tips on how to collect shells and how to remove barnacles, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 733,147 times.

Did this article help you?

How To Clean Sea Sponge From Beach

Source: https://www.wikihow.com/Clean-and-Polish-Seashells

Posted by: coxhusloncom.blogspot.com

0 Response to "How To Clean Sea Sponge From Beach"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel